Videos - Applications/Technical Support

In addition to small hole EDM drilling, the CHMER CNC EDMs offer an optional software package that allows for 3D shape machining using G-codes. The electrode tube is used like a...

The CHMER CNC Drillers offer both EDM drilling as well as optional 3D shape machining capabilities. The drillers are available in 3, 4, 5 and 6-axes configurations and some mode...

The new FC45HW Fast Wire EDM is a patented design that cuts the inverted build plate horizontally submerged in deionized water, so that the delicate cut parts float to the bottom of the work tank into a catch basket for easy retrieval. The FC model is available in two sizes: 400 x 400 mm and 625 x 625 mm to handle most build plates. An optional loading cart is available to i...

The 4-axis Fast Wire EDMs are full wire EDMs that can cut shapes and tapers just like conventional brass wire EDMs. The only feature it cannot do is auto thread the wire. This is a manual operation. However, with average cut times for a new piece of .007" dia. molybdenum wire around 80-100 hours, if it is a long cut like large profiles or tall keyways, there is not much auto...

The CHMER HM Series of High Speed (30,000 - 50,000 rpm) Mills were designed to cut both graphite and hard metals like molds and dies. These high-speed mills have 2000 block look-ahead software that can compensate the feed rates to maintain constant cutter loads depending on the contours to minimize cutter failure. The universal Gentec PC included as standard, uses a Fanuc em...

The CHMER CNC EDM drillers can both EDM drill the jet engine cooling holes, but also EDM mill the fan shaped diffuser shapes using the same tubular brass or copper electrodes. This allows for one setup in one EDM and one dielectric, deionized water to complete all of the EDM work. The CHMER CNC drillers also offer a new optional probing software package to allow for easy pro...